User Management; Creating A User Profile - Sartorius CUBIS MSU User Instructions

Information for the User
H
30 Cubis MSU Brief Instructions

User Management

You can configure the following settings in this menu:
– Activating a user
– Creating a user profile (only possible as Administrator)
– Editing user profiles (modify, copy, delete, change or delete password,
depending on user rights)
User Administration
The user administration allows for defining of users with distinct sets of rights:
the Administrator and multiple users.
Administrators can access all functions (except for the Service area) and have all
types of rights in all areas of the program. Only the Administrator can create new
user profiles and assign them individual rights.
On the other hand, a user cannot use all functions. Users have restricted rights,
which are defined in the user profile.
No user profiles exist when the balance is delivered. The balance is in Administrator
mode so that all settings can be modified. The first user profile created is auto-
matically an Administrator account. This account is used to create additional
accounts.
To open the User Management menu, press the button USER H.
H
t
y The menu is opened, and the list of user profiles is displayed.
Create a user profile
This function is only available to an Administrator.
h
You can configure the following settings in a user profile; these settings apply only
to the user defined by this profile:
– Language
– Display of help texts (on or off)
– Display settings (color, brightness)
– Acoustic signal: on/off; volume
– User rights
– Password protection
– Name and designation of the profile
To create a new user profile, select
t
Select
Create
t
The program guides you through the procedures for configuring the user profile.
Make your selection by selecting the desired option and confirming with the w
softkey; the program automatically advances to the next prompt.
or
If the desired option is already selected (highlighting), select
prompt.
If more than one option can be selected for a single setting, select
making your selection(s) to proceed to the next prompt.
Edit.
.
to reach the next
Next
after
Next