Ambush Codes - Security Command XR20 User Manual

User Codes
continued
Deleting User codes:
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays ADD
DEL CHG.
4. Press the SELECT key under DEL to delete a user code from
the system. You must have a Master user code level to be able
to delete a user code.
5. At the USER NUMBER: - prompt, enter the user number you
want to delete and press COMMAND. The displays changes to
USER # DELETED.
6. The display then changes back to USER NUMBER: - for you
to delete another user. Press the ARROW key twice to exit the
User Menu.

Ambush Codes

Your system may be programmed to allow user number 1 to be an
Ambush code. The Ambush code functions identically to other
codes with the exception that it sends a silent alarm to the central
station. This silent alarm alerts the operator to a duress situation at
the premises and prompts the immediate notification of the authorities.
Refer to the System Setup section of this guide to see if your system
is programmed for Ambush. If so, do NOT program a code for user
number 1 unless you intend to use the Ambush function.
18
User Menu
Changing User codes
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any one of the SELECT keys. The keypad displays ADD
DEL CHG.
4. Press the SELECT key under CHG to change a user code. You
must have a Master user code level to change a user code.
5. At the USER NUMBER:
change and press COMMAND.
6. The display changes to CODE NO:
digit user code and press COMMAND. If the code you entered
is already in use, or is a code used internally by the system, the
keypad displays ALREADY IN USE. You must enter a different
4-digit user code.
7. If you are changing a code other than your own, the keypad next
displays MASTER? NO YES. Select YES if you want this user
to have a Master authority level.
Select NO if you want this user to have a Standard authority level.
If you select NO, refer to item number 7 in the Adding User Codes
section on the previous page.
Important: Changing a user code does not change the user number.
User number two may have their user code changed from 1234 to
5678 but they are still user number two.
- prompt, enter the user number to
* * * *
. Enter the new 4-