Date And Time - Security Command XR20 User Manual

Date and Time

User Code Level: Master only.
Function: Allows you to change the current date and time displayed
on the keypad and used by the system for schedules and Display
Events.
Setting the Date and Time
1. Access the User Menu.
2. Press COMMAND until TIME? displays.
3. The keypad displays the current day and time. Press the
COMMAND key. The keypad displays the current date. Press
the COMMAND key to make any changes.
4. The keypad displays TIME DAY DATE.
5. Press the SELECT key under TIME to change the time. The
keypad displays – : AM PM. Enter the current time and select
AM or PM.
The display changes back to TIME DAY DATE.
6. Press the SELECT key under DAY to change the day of the
week. The keypad displays SUN MON TUE WED. If the current
day is not displayed, press the COMMAND key. Press the
SELECT key under the correct day.
The display changes back to TIME DAY DATE.
20
User Menu
7. Press the SELECT key under DATE to change the date. The
keypad displays:
MONTH: – Enter one or two digits for the month. Press
COMMAND.
DAY: – Enter up to two digits for the day. Press COMMAND.
YEAR: – Enter up to two digits for the year. Press COMMAND.
The display returns to TIME DAY DATE. Press the ARROW
key to exit the User Menu.