Installation Guidance; How To Set A Helmet - Sharp IG-CH2E Operation Manual

INSTALLATION GUIDANCE

Connection of AC adapter and installation of main unit
1
Insert the DC plug of AC
adapter in the DC jack of
the main unit.
2
Insert the AC plug of AC
adapter in the outlet.
3
Place the main unit at the level place in the room.
Precautions on installation
• Be sure to place the product at the stable place.
• Do not block the suction port and the air outlet.
• If this Plasmacluster Ion Generator may cause interference to radio or television
reception, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the product and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

HOW TO SET A HELMET

• Be sure to turn up the shield to have circulation of air.
• Remove the drops of water when helmet is rained.
<In case of full-face type> <In case of open-face type> <In case of half type>
DC jack
DC plug
AC plug
E-6
AC adapter