Installation Guidance - Sharp UJ-GC20E Operation Manual

INSTALLATION GUIDANCE

Connecting the car adapter and installing the unit
Insert the car adapter into the accessory socket and connect the USB
plug to the car adapter.
Note
• Be sure to remove any dirt from the
accessory socket. Failure to do so
could cause faultily contact or fi re.
1
• The car adapter has 2 USB ports, one of which the Plasmacluster Ion
Generator (UJ-GC20E) uses and another to connect equipment of
1.5A or lower.
• The car adapter (accessory) is for the Plasmacluster Ion Generator
"UJ-GC20E".
It is possible to connect another equipment of 1.5A or lower while the
Plasmacluster Ion Generator is connected. However, in this case, the
normal operation of the additional equipment is not guaranteed.
• The car adapter and/or connecting section could be hot while in use
and/or right after use.
Adjust the angle of louver
and put the unit in the cup
holder.
2
Approx. 55°
E-5
Car Adapter
Accessory
Socket
USB Plug
Approx. 20°