Toshiba QOSMIO G40 Maintenance Manual page 369

4.43 Fluorescent Lamp
7. Turn the LCD module face down. Bend the circuit board inside and secure it with the
copper tape (F).
CAUTION: When handling the circuit board, do not hold both edges.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
Before sticking the copper tapes, clean the adhered portion with alpha
cleaner to remove dirt and remaining of glue. After cleaning, do not directly
touch the adhered portion.
After sticking the tape, check followings.
The copper tape is not out of the GND pattern of board.
The circuit board is not on the P chassis.
Checking for engaging of hooks
Engaging : OK
Figure 4-94 Replacing 17.1 Inch Sharp fluorescent lamp (15)
4 Replacement Procedures
Hook of the P chassis
Being on : NG
[CONFIDENTIAL] 4-131