Toshiba QOSMIO G40 Maintenance Manual page 253

4.4 HDD
5. (When an HDD-2 is installed) Remove the following screws securing the HDD-2 slot
cover.
6. Slide the HDD-2 slot cover in the direction of the arrow in the figure below.
7. Insert your finger into the slit and remove the HDD-2 slot cover.
8. Remove the following screw securing the HDD-2 assembly.
9. Remove the HDD-2 assembly from the connector on the system board.
M2.5x6B FLAT HEAD
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
• M2.5×6B
FLAT HEAD screw
• M2.5×6B
FLAT HEAD screw
M2.5x6B FLAT HEAD
Slit
Figure 4-7 Removing the HDD-2 assembly
×2
×1
HDD-2 assembly
[CONFIDENTIAL]
4 Replacement Procedures
HDD-2 slot cover
4-15