Led Board - Toshiba QOSMIO G40 Maintenance Manual

4 Replacement Procedures
4.23

LED board

Removing the LED board
The following describes the procedure for removing the LED board (See Figure 4-44).
1. Disconnect the LED cable from the connector on the LED board.
2. Remove the following screw and LED board.
Installing the LED board
The following describes the procedure for installing the LED board (See Figure 4-44).
1. Install the LED board to the base assembly and secure it with the following screw.
2. Connect the LED cable to the connector on the LED board.
4-60
Downloaded from LpManual.com Manuals
• M2.5×4B
FLAT HEAD screw
Figure 4-44 Removing the LED board
• M2.5×4B
FLAT HEAD screw
[CONFIDENTIAL]
×1
M2.5x4B FLAT HEAD
LED board
LED cable
×1
QOSMIO G40 Maintenance Manual (960-632)
4.23 LED board