Toshiba QOSMIO G40 Maintenance Manual page 223

3.30 SETUP
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
(e) Start Up Logo
(f) Sound Logo
(g) Qosmio AV Controller
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
Set the parameters for the Auto Power On (automatic power on) function and
the Wake-up on LAN in the "OPTIONS" window. To set the time, use Space
or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the
cursor to the left when you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
"second" cannot be set. When it is set to "Disabled", the time to turn on
automatically is not set.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to "Enabled" only when "Built-in
LAN" is set to "Enabled". To activate this function, use the AC adapter.
On Battery
The following settings can be changed when the Wake-up on LAN is Enabled.
Enabled Wake-up on LAN function whenoperating from the battery.
Disabled Wake-up on LAN function whenoperating from the battery
(Default).
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
This option sets "Qosmio" logo displayed when booting.
Animation Displays the animation logo. (Default)
Picture Displays the picture logo.
This option enables or disables sound logo function.
Enabled Enables the sound logo function. (Default)
Disabled Disables the sound logo function.
This feature enables or disables the Qosmio AV Controller and the Front
operation panel.
3 Tests and Diagnostics
[CONFIDENTIAL] 3-87