Toshiba QOSMIO G40 Maintenance Manual page 271

4.11 Cover assembly/Base assembly
2. Disconnect the LCD cable, volume cable, touch pad cable, AV11 button cable,
and tweeter cable from the connector CN5000, CN5816, CN3330, CN3240,
CN9650 and CN6170 on the system board.
3. Peel off the glass tape and disconnect the AV controller cable from the connector
CN9700 on the system board.
4. Remove the following screws securing the cover assembly.
LCD cable
(Connected to CN5000 and CN5816)
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
• M2.5×8B
FLAT HEAD screw
AV11 button cable
(Connected to CN9650)
Volume cable
(connected to CN3330)
Figure 4-22 Removing the cover assembly/base assembly (1)
×2
Tweeter cable
M2.5x8B FLAT HEAD
(Connected to CN6170)
Touch pad cable
(Connected to CN3240)
[CONFIDENTIAL]
4 Replacement Procedures
Glass tape
AV controller cable
(Connected to CN9700)
4-33