Toshiba QOSMIO G40 Maintenance Manual page 366

4 Replacement Procedures
4. Turn the BL unit (G) face down and install the reflection sheet (L) and light guide
plate (K).
CAUTION: Do not scratch or make dirty.
[Outline of the section of lamp side]
O/Lamp
4-128
Downloaded from LpManual.com Manuals
Insert the reflection sheet (L) in to the lamp unit (O) and place it at the
projection portion on the short side.
Insert slantingly the light guide plate (K) (not to deform the reflector (a part
of O)). Stick the thin side to the double-sided tape (U) and secure it.
Figure 4-91 Replacing 17.1 Inch Sharp fluorescent lamp (12)
O/Reflector
Reflection sheet (L)
[CONFIDENTIAL]
4.43 Fluorescent Lamp
QOSMIO G40 Maintenance Manual (960-632)
(K)
(L)