Toshiba QOSMIO G40 Maintenance Manual page 300

4 Replacement Procedures
4. Disconnect the touch pad cable from the connector on the touch pad and connector
CN9660 on the fingerprint sensor board.
5. Disconnect the touch pad switch cable from the connector CN3340 on the
fingerprint sensor board.
6. Turn over the touch pad/fingerprint sensor board and remove the following screw and
fingerprint sensor board.
4-62
Downloaded from LpManual.com Manuals
• M2×3C
S-THIN HEAD screw
Fingerprint sensor board
Touch pad cable
Figure 4-46 Removing the fingerprint sensor board
[CONFIDENTIAL]
4.24 Touch pad/Fingerprint sensor board
M2x3C S-THIN HEAD
Guide
QOSMIO G40 Maintenance Manual (960-632)
×1
Touch pad switch cable
CN3340
CN9660