4.26 AV controller button
Installing the AV controller button
The following describes the procedure for installing the AV controller button (See Figure 4-
48).
1. Connect the AV controller cable and AV switch cable to a new AV controller
button and stick the AV controller button in place.
NOTE: Do not reuse the removed AV controller button. Be sure to use a new AV
2. Install the AV controller switch to the cover assembly and secure it with the
following screws.
3. Stick the insulator in place.
4. Connect the AV switch cable to the connector on the AV controller switch.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
controller button.
• M2.5×4B
FLAT HEAD screw
4 Replacement Procedures
×2
[CONFIDENTIAL]
4-67