Toshiba QOSMIO G40 Maintenance Manual page 178

3 Tests and Diagnostics
Subtest 03
Subtest 04
NOTE: When executing this subtest, USB test module and USB cable must be
#################################################################
########
#################################################################
*
* 0 ............
* 1 ............
* 2 ............
* 3 ............
* 4 ............
* 9 ............
*
*****************************************************************
.... Press test number[0-4, 9] ?
3-42
Downloaded from LpManual.com Manuals
Wireless communication Switch
This subtest checks if the Wireless communication switch works properly.
If the test is started with the switch ON, following message appears in the
display.
Wireless communication Switch
position (OFF)
Slide the switch to OFF position. Then, following message appears in the
display.
Wireless communication Switch
Slide the switch to ON position. Then, following message appears in the
display.
Wireless communication Switch
After Sliding the switch to OFF position, return to the ONLY ONE TEST
menu automatically.
USB
connected.
This subtest checks if USB port works properly.
The following menu appears in the display.
USB Port Select (XXXXXXXXX)
Port 0 (Left side front)
Port 1 (Left side back)
Port 2 (Right side)
Port 3 (Back side upper)
Port 4 (Back side lower)
EXIT
Connect the USB test module and USB cable to the computer.
Input the port test number and press Enter.
[CONFIDENTIAL]
3.20 ONLY ONE TEST
is set to a start
ON !!
OFF !!
QOSMIO G40 Maintenance Manual (960-632)
#######
*
*
*
*
*
*
*
*