Table of Contents
Advertisement
Using input dynamics effects
This unit has three dynamics effects: a compressor, an
exciter and a de-esser. One can be used at a time with
INPUT A and/or B.
COMPRESSOR
This effect compresses the sound, reducing the
dynamic range.
EXCITER
By emphasizing the harmonics of high frequencies,
this effect gives a sense of liveliness to the sound and
makes tones more distinct without upsetting the
volume balance.
DE-ESSER
This effect suppresses sibilant "s" sounds.
Applying dynamics effects
Press the INPUT SETTING/EQ/DYN button to
1.
open the
INPUT SETTING
Press the F3 [DYN] button to open the
2.
screen.
DYNAMICS
NOTE
Press the F1 [BACK] button to return to the
screen.
SETTING
screen.
INPUT
INPUT
6 – Basic Recording
Use the F3 [5] and F4 [b] buttons to select
3.
(highlight) the following parameters, and use the
DATA wheel to adjust their values.
INPUT A or INPUT B
Select the input that the dynamics effect is used
on.
DYN-SW (dynamics switch)
Set to "ON" to apply the selected effect (default:
OFF).
TYPE
Select which dynamics effect to use.
Options: COMP (default), EXCITER, DE-ESSER
4.
After making the settings, press the HOME button
to return to the Home Screen.
Using the compressor
Set the
on the
TYPE
INPUT DYNAMICS
to use the compressor.
COMP
1.
When the
INPUT DYNAMICS
use the F3 [5] and F4 [b] buttons to select
(highlight) the
TYPE
2.
Use the
wheel to select (highlight)
DATA
Use the F3 [5] and F4 [b] buttons to select
3.
(highlight) the following parameters, and use the
DATA wheel to adjust their values.
LINK
When
, INPUT A and INPUT B are linked
ON
(default: OFF). When linked, the compressor
responds to and affects both inputs.
screen to
screen is open,
item.
COMP
45
TASCAM DP-008EX
.
Advertisement
Table of Contents
