Effects; Mic Effects; Mic X 4; Assigning Mic Effects - Tascam 2488 User Manual

The 2488 includes high-quality effects that may be
used to enhance your playing.
They may be used in a number of different ways for
use in different stages of the production process.
• Firstly, the effects may be used on up to eight chan-
nels and/or inputs (that is, eight signals in total) as
inserted mic effects.
• Alternatively, up to four mic effects may be used
together with an inserted multi-effect.
• Lastly, a single high-quality effect may be used.
This is fed by the internal LOOP ("Effect send" on
page 23).

Mic effects

MIC X 4

Select four mic effects and the multi-effect
by pressing the
MICX4 EFFECT
If the eight mic effects setting has previously been
selected, the mic effect assignments already made are
unassigned.
MIC X 8
Select eight mic effects by using the
and
MULTI MICX4 EFFECT

Assigning mic effects

Assign and unassign channels and inputs in the same
way that channels are assigned to inputs (see "Inputs
and assignments" on page 21). In other words, press-
ing and holding the
MICX4
mic effects are selected) and pressing a channel or
input key assigns or unassigns the mic
SELECT
effect to or from the channel/input.

Selecting mic effects

1
When the MICX4 key is pressed (regardless of
whether eight or four mic effects have been
selected), and the
SELECT
track is pressed, the
key.
keys ( )located
MICX8
key (whether four or eight
key of the input or
screen is shown:
MIC EFFECT
The parameters of the effects may be edited and
stored in libraries allowing the same effect setting to
be used on multiple tracks or used in different parts
of the same project.
These library effects are available between songs
(and disk partitions—see "Disk management" on
page 65).
Whether or not the parameters are stored in a library
entry, effect assignments and parameters are always
stored as part of a song.
above the channels. Press and hold one of these keys
and then press the other one.
If the four mic effects + multi-effect setting is already
selected, the multi-effect is unassigned, and the four
mic effect assignments are left in place.
To "unlink" these two keys, press and hold them
together again.
If all available mic effects are being used, attempting
to assign another channel or input has no effect. You
must free up some inputs or channels to allow new
ones to be assigned.
A stereo channel (13-14 through 23-24) counts as
two channels. In other words, up to eight mono or
four stereo, or intermediate combinations at a time,
can use mic effects in this mode.
2
Press to access the effect library:
ENTER
3
Use the left and right keys to select either the
preset ( ) library, the user library (
PRESET
or save ( ) the current setting.
SAVE
TASCAM 2488 User's Guide
3 – Effects
)
USER
31