Manufacturing Mode (Jpme2); Bios Restore Button (S11) - Supermicro Supero C7Z97-M User Manual

Supermicro C7Z97-M Series Motherboard User's Manual

Manufacturing Mode (JPME2)

Close Pin 2 and Pin 3 of Jumper JPME2
to bypass SPI flash security and force
the system to operate in Manufactur-
ing Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.

BIOS Restore Button (S11)

When pressed, the BIOS Restore Button
will look for, and load a file named 'SU-
PER.ROM' from an installed USB memory
device, in any of the USB ports. It will
then proceed to update the BIOS.
NOT turn off the system when BIOS is
updating.
JL2
JI2C1
JI2C2
JBT1
S8
A
S11
B
JF1
JSD1 I-SATA0
HD AUDIO
FAN5
BIOS
LICENSE
USB8/9(3.0)
JD1
I-SATA1 I-SATA3
FAN3
Pin#
1-2
2-3
A. Manufacturing Mode
B. BIOS Restore
Do
HDMI/DP
LAN
USB 12/13
(3.0)
USB 2/3
(3.0)
JPL1
C7Z97-M
Rev. 1.00
JPW1
I-SATA1 I-SATA3 I-SATA5
I-SATA0 I-SATA2 I-SATA4
2-32
Manufacture Mode (JPME2)
Jumper Settings
Definition
Normal (Default)
Manufacture Mode
USB 0/1
VGA(IPMI)
KB/MOUSE
JPW2
S4
DIMMA1
DIMMA2
DIMMB1
DIMMB2
FAN2