Manufacturing Mode; Bios Recovery Enable - Supermicro X10SRD-F User Manual

Manufacturing Mode

Close pins 2 and 3 of jumper JPME2 to
bypass SPI flash security and force the
system to operate in the Manufacturing
Mode, allowing the user to flash the
system firmware from a host server for
system setting modifications. See the
table on the right for jumper settings.

BIOS Recovery Enable

Close pins 2 and 3 of jumper JBR1 for
BIOS recovery. The default setting is on
pins 1 and 2 for normal operation. See
the table on the right for jumper settings.
UID
JUIDB1
SW1
JIPMB1
JPB1
X10SRD-F
REV:
SP1
DESIGNED IN USA
JPF1
J3
JPF2
JBR1
JVRM2
JVRM1
JWD1
JBT1
BT1
JTPM1
FAN1
KVM USB0/1
JSTBY1
IPMI_LAN
JPG1
JUSB2
USB1(3.0)
LEDM1
1.00
JSD1
B
I-SATA5
I-SATA4
A
JPME2
CPU
J5
S-SGPIO1
S-SATA/SAS0
S-SATA/SAS1
2-27
Chapter 2: Installation
Manufacturing Mode
Jumper Settings
Pin# Definition
1-2 Normal (Default)
2-3 Manufacturing Mode
BIOS Recovery
Jumper Settings
Pin# Definition
1-2 Normal
2-3 BIOS Recovery
A. ME Manufacturing Mode
B. BIOS Recovery