Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro Supero C7Z97-M User Manual

Supermicro C7Z97-M Series Motherboard User's Manual

2-5 Motherboard Installation

All motherboards have standard mounting holes to fit different types of
chassis. Make sure that the locations of all the mounting holes for both
motherboard and chassis match. Although a chassis may have both plas-
tic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the
metal standoffs click in or are screwed in tightly. Then use a screwdriver
to secure the motherboard onto the motherboard tray.
Philips Screwdriver (1)

Tools Needed

JL2
JI2C1
JI2C2
JBT1
S8
S11
JF1
JSD1

Location of Mounting Holes

Attention! 1) To avoid damaging the motherboard and its com-
ponents, please do not use a force greater than 8 lb/inch on each
mounting screw during motherboard installation. 2) Some compo-
nents are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (8)
FAN5
JD1
I-SATA0
I-SATA1 I-SATA3
FAN3
LAN
USB 12/13
(3.0)
HD AUDIO
USB 2/3
(3.0)
JPL1
BIOS
LICENSE
USB8/9(3.0)
JPW1
I-SATA1 I-SATA3
I-SATA0 I-SATA2
2-12
Standoffs (8)
Only if Needed
HDMI/DP
USB 0/1
VGA(IPMI)
KB/MOUSE
JPW2
C7Z97-M
Rev. 1.00
S4
DIMMA1
DIMMA2
DIMMB1
DIMMB2
FAN2
I-SATA5
I-SATA4