Front Control Panel Pin Definitions; Power Led; Hdd Led; Nic1 (Lan1) - Supermicro Supero C7Z97-M User Manual

Front Control Panel Pin Definitions

Power LED

The Power LED connection is located on
pins 15 and 16 of JF1. Refer to the table
on the right for pin definitions.

HDD LED

The HDD LED connection is located on
pins 13 and 14 of JF1. Attach a cable
here to indicate the status of HDD-
related activities, including IDE, SATA
activities. See the table on the right for
pin definitions.

NIC1 (LAN1)

The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1. NIC1 LED is a
2-pin NIC LED header. Attach a NIC LED
cable to the NIC1 indicator to display
network activity. Refer to the table on
the right for pin definitions.

Overheat (OH)/Fan Fail

Connect an LED cable to OH/Fan Fail
connections on pins 7 and 8 of JF1 to
provide warnings for chassis overheat/
fan failure. Refer to the table on the right
for pin definitions.
D
Power LED
A
B
HDD LED
C
NIC1 LED
X
OH/Fan Fail LED
X
Ground
Ground
2
2-19
Pin Definitions (JF1)
Pin#
15
16
Pin Definitions (JF1)
Pin#
13
14
Pin Definitions (JF1)
Pin#
9/11
10/12
Pin Definitions (JF1)
Pin#
7
8
OH/Fan Fail Indicator
State
Off
On
Flash-
ing
LED_Anode+
LED_Anode+
LED_Anode+
X
LED_Anode+
X
Reset
Reset Button
Power Button
PWR
1
Chapter 2: Installation
Power LED
Definition
+5V
Ground
HDD LED
Definition
+5V
HD Active
LAN1 LED
Definition
Vcc
Ground
OH/Fan Fail LED
Definition
Vcc/Blue UID LED
OH/Fan Fail LED
Status
Definition
Normal
Overheat
Fan Fail
A. PWR LED
B. HDD LED
C. NIC1 LED
D. OH/Fan Fail