Table of Contents
Advertisement
Processor Current Limit (1/8 Amp)
Long Duration Power Limit (Watts)
Short Duration Power Limit (Watts)
Memory OC Button Setting Configuration
Load Memory Profiles
Use this feature to assign Performance Memory Profiles for the Memory
OC Button. Select Automatic to allow the BIOS to automatically set
Performance Memory Profiles. Select Manual to manually configure Per-
formance Profiles, see below. Select XMP Profile 1 or XMP Profile 2 to
use the XMP Profiles configured under the Memory Overclocking section
on Page 4-24. The options are Automatic, Manual, XMP Profile1 and
XMP Profile2.
The following become available if Manual is selected above:
Memory OC Button Setting Configurations
Memory Clock
This option selects the Memory Clock Multiplier. The options are
1.33 and 1.00.
Memory Frequency
This option selects the type/speed of the memory installed. The
options are DDR3-1066MHz, DDR3-1333MHz, DDR3-1600MHz,
DDR3-1866MHz and DDR3-2133MHz.
CAS# Latency (tCL)
This option configures the Cas Latency Range. Enter a number
between 4-18. The default is 9.
Row Precharge Time (tRP)
This option selects the Ras Precharge Range. Enter a number be-
tween 1-38. The default is 11.
RAS# to CAS# Delay (tRCD)
This option configures the Row to Col Delay Range. Enter a number
between 1-38. The default is 11.
4-31
Chapter 4: AMI BIOS
Advertisement
Table of Contents
