Overclocking Svid And Fivr Options; Svid Control Enable; Svid Override Voltage Target (Mv); Fivr Faults Enable - Supermicro Supero C7Z97-M User Manual

Chapter 4: AMI BIOS

Overclocking SVID and FIVR Options

SVID Control Enable

Select Enabled to enable SVID control for Intel SVID Protocol support.
If this setting is set to Disabled, there will be no change made to SVID
until the CPU powers down. The options are Enabled and Disabled.

SVID Override Voltage Target (mV)

Use this feature to set the value for SVID Override Voltage Target (up to
2500 mV). Enter 0 to use the manufacture default value.

FIVR Faults Enable

Select Enabled to enable FIVR Faults support. If this setting is set to
Disabled, there will be no change made to FIVR Faults settings until the
CPU powers down. The options are Enabled and Disabled.

FIVR Efficiency Enable

Select Enabled to enable FIVR Efficiency support. If this setting is set to
Disabled, there will be no change made to FIVR Efficiency status until
the CPU powers down. The options are Enabled and Disabled.

CPU Input Voltage

CPU Input Voltage
Warning! Carefully select the CPU input voltage, otherwise the CPU will
burn. Alos, increasing the CPU voltage will cause the CPU temperature
to rise. This needs to be compensated with an upgrade in the cooling
system. The options are Auto, 1.85V, 1.90V, 1.95V, 2.00V, 2.05V, 2.10V,
2.15V, 2.20V, 2.25V, 2.30V, 2.35V and 2.40V.
4-23