Table of Contents
Advertisement
Chapter 4: AMI BIOS
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors
will "capture" Interrupt 19 at boot and allow the drives that are attached
to these host adaptors to function as bootable disks. If this item is set
to Disabled, the ROM BIOS of the host adaptors will not capture Inter-
rupt 19, and the drives attached to these adaptors will not function as
bootable devices. The default is unchecked (Off).
Re-try Boot
In the event the system fails to boot, this will enable the system to
retry to boot the system again. The options are Enabled and Disabled.
Watch Dog
If enabled, the Watch Dog timer will allow the system to reboot when it is
unresponsive for more than 5 minutes. The default is unchecked (Off).
Power Button Function
This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are Instant Off, and 4
Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power loss. Select
Power-On for the system power to be turned on after a power loss. Select
Last State to allow the system to resume its last power state before a
power loss. The options are Last State, Power On, Stay Off.
EUP Support
EuP, or Energy Using Product is a European energy-saving specifica-
tion that sets a standard on the maximum total power consumption on
electrical products. Check the box to activate EUP support, the default
is Uncheched (Disabled).
4-49
Advertisement
Table of Contents
