Martin MAC Quantum Profile User Manual page 29

Menu level 1 Menu level 2
ERROR LIST
FAN CLEAN
PT FEEDBACK
CALIBRATION
SERVICE
USB
* Menus marked * are available only when the fixture is connected to mains power. All other menus are available in mains- and
battery-powered operation.
Menu level 3 Menu level 4
Empty or up to 20 errors
ON/OFF
ON
OFF
DIMMER ... 0.00 ...+/- xx%
PAN 0.00 ...+/- xx%
TILT 0.00 ...+/- xx%
LOAD DEFAULTS LOAD
SAVE DEFAULTS SAVE
NO DEVICE
UPDATING FILES
AVAILABLE XX.XX.XX ...
FIRMWARE XX.XX.XX
Table 3: Control menus
Control panel menus
Notes (Default settings in bold print)
Display any errors in memory
Activate fan cleaning
Enable pan/tilt position feedback
systems
Disable pan/tilt position feedback
Define home position of all effects.
Plus/minus percentage available depends
on effect
Define pan home position
Define tilt home position
Load factory default calibration settings
Replace factory default calibration settings
with current calibration settings
No USB device present or no firmware on
USB device
Fixture updating internal memory from
USB device
Select firmware from versions stored in
internal memory. Scroll to select version,
then press Enter and confirm your choice
to update
29