Starting Remote Ui - Canon MF229dw User Manual

Starting Remote UI

To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI. Check the IP
address set to the machine in advance (
1
Start the Web browser.
2
Enter "http://(the IP address of the machine)/" in the address field, and press the [ENTER] key.
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed
A security alert may be displayed if communication with an Apple device is encrypted (
Data for Apple Devices with TLS). When certificate settings or TLS settings have no errors, continue browsing the Web site.
3
Log on to the Remote UI.
When a System Manager PIN is not set
Select [System Manager Mode] or [End-User Mode].
[System Manager Mode]
You can perform all the Remote UI operations and settings. If a System Manger PIN is not set (factory default settings), you do
not need to input anything.
[End-User Mode]
You can check the status of documents or the machine, and you can also change some of the settings. If you wish to delete
your print documents, enter the user name of the documents in [User Name]. The user name is automatically set to print
documents based on information such as your computer name or computer logon name.
When a System Manager PIN is set
Enter the registered [System Manager PIN]. (
4
Click [Log In].
Portal Page (main page) will be displayed.
Downloaded from ManualsPrinter.com Manuals
Viewing Network Settings). If you have any questions, ask your Network Administrator.
Setting the System Manager PIN)
Remote UI Screens
0KCY-09Y
Encrypting Communication of Print