Canon MF229dw User Manual page 346

Off-Hook Alarm
Select whether the machine makes an alert sound when the handset of a telephone or the optional handset connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0 to 5
<Menu>
<Apply>
Communication Management Settings
Specify the communication start speed settings and the R-key settings.
TX Start Speed
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be made when it takes a
long time to start sending a fax due to a poor telephone line connection.
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
<Menu>
Select a communication start speed
RX Start Speed
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be made when it takes a
long time to start receiving a fax due to a poor telephone line connection.
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
<Menu>
Select a communication start speed
R-Key Setting
If your machine is connected through a PBX (Private Branch Exchange), it is necessary to
set the access method. You can set the PBX type to <Prefix> or <Hooking>. If you register the outside line access number to the
R-key, you can easily access the outside line.
PSTN
PBX
Prefix
*1
Hooking
Downloaded from ManualsPrinter.com Manuals
<Fax Settings> <Basic Settings>
<Fax Settings> <Basic Settings>
<Fax Settings> <Basic Settings>
<Off-Hook Alarm> Select the volume of the alert sound
<Communication Management Settings>
<Communication Management Settings>
<TX Start Speed>
<RX Start Speed>