Setting The System Manager Pin - Canon MF229dw User Manual

Setting the System Manager PIN

Set a System Manager PIN that is intended exclusively for Administrators. You can access <Network Settings>, <System Management
Settings>, etc. only when the PIN has been entered correctly. It is recommended that only Administrators know the PIN.
1
Tap <Menu> in the Home Screen.
2
Tap <System Management Settings>.
3
Select <System Manager Information Settings>
4
Specify the System Manager PIN.
Enter a number of up to seven digits using the numeric keys, and tap <Apply>.
When <PIN (Confirm)> is displayed, enter the PIN once again to confirm.
You cannot set a PIN that consists only of zeros, such as "00" or "0000000".
To disable the PIN, press
Setting the System Manager Name
1
Tap <System Manager Name>.
2
Enter up to 32 characters for the System Manager Name, and tap <Apply>.
Configuring settings via the Remote UI
Start the Remote UI and log on in System Manager Mode. Click [Settings/Registration]
specify the necessary settings on the displayed screen.
By using the Remote UI, you can register a variety of information, including contact information, Administrator comments, the
installation location of the machine, as well as to the settings that you can register by using the operation panel. The
registered information can be viewed on the [Device Information] page of the Remote UI.
Information
If a System Manager PIN is Set
If you try to access <Network Settings>, <System Management Settings>, etc., the
following screen is displayed. Enter the set PIN.
Entering a PIN is also required when logging on in System Manager Mode in the Remote UI.
Starting Remote UI
Downloaded from ManualsPrinter.com Manuals
<System Manager PIN>.
to erase the PIN (leave the text box blank), and tap <Apply>.
0KCY-08U
Entering Text
[System Management] [Edit...] and
Checking System Manager