FCC requires to never use the cell phone in the cradle next to your ear . Inside this Package Vehicle Dash DC Plug-In Power Supply Mini-Magnet Mount Antenna Adjustable Arms Sleek 4G Adhesive & USB cable ® (301126) Mounting Bracket...
• P eel the backing to expose the adhesive Sleek 4G by aligning the rectangular hole and press the bracket onto the desired on the back of the Sleek 4G with the tab on location on the dashboard . NOTE: Be the Mounting Bracket, grasping the sides sure the tab is positioned vertically .
(feedback) . Your cell phone must • S elect a window on the side of the be in the cradle for the Sleek 4G to amplify the building where you get the strongest cell signal . Use a Bluetooth headset, wired hands- signal .
. If the light is red, move the Outside Antenna farther away from the Sleek 4G . On a vehicle, that usually means moving it farther toward the back of the car . Remember to keep the antenna at least 6 inches from any window or sunroof .
What’s the difference between the 800 MHz and the 1900 MHz bands? How do I know which MHz band my cell phone uses? The Sleek 4G works with all major North American cellular providers on the 850 & 1900 MHz frequencies . Traditionally, 850/1900MHz are associated with voice and 3G data; while 700MHz and 1700/2100MHz are associated with 4G data .
WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone . WARNING: Use only the power supply provided in this package . Use of a non-Wilson Electronics product may damage your equipment .
Returned Material Authorization (RMA) number supplied by Wilson Electronics . Wilson Electronics shall, at its option, either repair or replace the product . Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U .S .