Adjusting The Sleek 4G Arms; Troubleshooting; Understanding The Sleek 4G Lights - Wilson Electronics Sleek 4G Manual

Adjusting the Sleek 4G Arms

Various sized arms are included with your Sleek
4G . These provide you with options to customize
the Sleek 4G to fit virtually any cell phone.
• T o change arms, gently lift the arm
upward until the arm slides free from the
Sleek 4G .
• T o reposition arms, move the arm above
a different slot on the Sleek 4G and
gently slide the arm down until the arm
is firmly in place.

Troubleshooting

Understanding the Sleek 4G Light
The light on the side of the Sleek 4G indicates
whether the system is working or if there are
problems . Take the following steps based on the
indicator light color when using the Sleek 4G .
5
Need help?
Light off: If the light is not on:
Check connections on the power supply to see
that it is firmly plugged into both the Sleek 4G
and the power source .
If using a DC power supply in your vehicle,
ensure the power supply is properly inserted .
Then check the 12 volt power from the car
socket and the fuse . Replace the fuse if
necessary .
If using a power strip in a building, ensure the
power strip is plugged in and turned on and that
power is coming from the outlet .
Red light: A red light indicates the Sleek 4G
has powered down to protect the cell tower .
Separation between the Sleek 4G and the
Outside Antenna is important to prevent
oscillation (feedback), similar to when a
microphone is too close to a speaker . When
oscillation occurs, the Sleek 4G shuts down in
order to prevent interference in the cell tower .
If the light is red, move the Outside Antenna
farther away from the Sleek 4G . On a vehicle,
that usually means moving it farther toward the
back of the car . Remember to keep the antenna
at least 6 inches from any window or sunroof .
In an office, move the location of the Sleek 4G
farther from the window where the antenna
is mounted . Once you have separated the
Outside Antenna and the Sleek 4G, reset the
Sleek 4G by disconnecting the power and then
reconnecting the power supply . If the light is
green, the Sleek 4G is working properly . If the
red light is still on, move the Outside Antenna
farther away and repeat the process .
Green light: A green light indicates the Sleek
4G is working properly .
www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST