Oil Pump Removal / Inspection - Sym MB10A7-A series Service Manual

4. Lubrication / Clutch / Transmission
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com

Oil Pump Removal / Inspection

Drain out the engine oil.
Remove the footrest and exhaust pipe.
Remove the kick starter (1 bolt).
Remove the right crankcase cover (8 bolts)
and clutch assembly.
Remove the primary drive gear.
Special tool：
Special nut socket wrench
SYM-9023100-SY125
Remove the oil pump (3 screws).
Caution
Impact screwdriver is allowed to be used
to remove the oil pump lock screws.
Oil pump disassembly
Remove the cir clip, washer and oil pump
driven gear
Remove the oil pump driven gear location pin.
4-16
To this chapter contents
Oil pump drive gear
Cir clip
Primary drive gear
3 screws
Location pin