Sym MB10A7-A series Service Manual page 34

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Air Filter
Air filter element
Remove the side cover.
Remove the air filter duct (1 screw).
Remove the air filter cover screw (4 screws).
Open the hold clip and remove the air filter
cover.
Remove the air filter element.
Check the filter element for dirty or damage.
Wash the air filter element with high flash
point solvent (for example, kerosene or diesel)
Squeeze out the cleaning solvent thoroughly,
soak the element into engine oil, and squeeze
out the excessive.
Re-install the filter and the cover.
If the air filter element is too dirty or damaged,
replace it with new parts.
Caution
Never use gasoline or other low-flash
point solvent for cleaning the element.
To this chapter contents
2. Maintenance Information
Screw
Air filter element
2 screws on both sides
wash squeeze
soak squeeze
Hold clip
2-5