Sym MB10A7-A series Service Manual page 72

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Open the location foot of the lock washer.
Remove the anti-loose locknut.
Remove the flexible washer, lock washer and
the whole clutch assembly.
Special tool：
Anti-loosen locknut socket wrench
SYM-9023100-SY125
Remove the clutch set ring.
Remove the drive gear outer, clutch center,
clutch plates and clutch friction disks from the
clutch outer.
Disassemble the drive gear outer, clutch
center, clutch plates and clutch friction disks.
To this chapter contents
4. Lubrication / Clutch / Transmission
Clutch set ring
Clutch center
Clutch friction disk B
Anti-loose nut
Location foot
Drive gear outer
Clutch free spring Clutch plate
Clutch friction disk A
4-7