Related Manuals for Sym MMBCU
Summary of Contents for Sym MMBCU
- Page 1 SANYANG MOTOR CO.,LTD. NO.3 Chung Hua Road, Hukou, Hsinchu,Taiwan R.O.C. T +886-3-598-1911 F +886-3-597-1981 W http://www.sym-global.com/ Owner's Manual TDA16T1-EU...
- Page 2 This manual describes the correct usage of this scooter including safety riding, simple inspection methods, etc. For a more comfortable and safety riding, please read this manual carefully. For your benefit, please ask your SYM dealer to read the manual and operate carefully the following: Correct use of the scooter.
-
Page 3: Table Of Contents
1. Contents 1. Contents ........................1 2. Before Riding ....................... 3 3. Safe Riding ........................3 4. Driving..........................4 5. Use Genuine Spare Parts ..................... 5 6. Parts Location and Operation ..................6 ........................6 Parts Location ........................7 Parts Operation Main switch Operation ........................ - Page 4 ....................23 Fuel Leakage Inspection ......................24 General Lubrication ....................... 24 Spark Plug Inspection ....................24 Cooling System Inspection ....................... 25 Air Cleaner Inspection 11. Taking Care of Your Scooter ..................26 ......................... 26 Washing ........................... 27 Storage 12. Trouble Shooting ...................... 28 .....................
-
Page 5: Before Riding
This manual describes the correct usage of this scooter including safety riding, simple inspection methods, etc. For a more comfortable and safety riding, please read this manual carefully. For your benefit, please ask your SYM dealer to read the manual and operate carefully the following: ‧Correct use of the scooter. -
Page 6: Driving
4. Driving Rider’s posture will greatly affect riding safety. Always keep your body’s gravity in the center of the saddle, if your body’s gravity is on the rear part of saddle, the front wheel load will be reduced, and this will cause the steering handle shaking. It is dangerous to ride a scooter with an unstable handle. -
Page 7: Use Genuine Spare Parts
In order to maintain the scooter’s best performance, each part’s quality, material, and machined precision conform with the design requirements. “SYM Genuine Spare Parts” are made from the same high quality materials used for the original scooter. No parts would be sold to the market until they could meet the designed specifications through sophisticated engineering and stringent quality control. -
Page 8: Parts Location And Operation
6. Parts location and operation Parts Location DRGBT (4) Brake fluid reservoir (1) Front brake lever (5) Oil level gauge (2) Speedometer (6) Fuse box (3) Rear brake lever (10) (11) (12) (13) (14) (15) (16) (17) (18) (7) Fuel cap (11) License light (15) Coolant level inspection window (8) Front fork... -
Page 9: Parts Operation
Parts Operation LED speedometer Ⓖ Ⓐ Ⓑ Ⓗ Ⓒ Ⓘ Ⓓ Ⓙ Ⓔ Ⓚ Ⓕ ○ Ⓐ Side Stand Down Indicator Light This indicator comes on when the side stand is kicked down. The engine cannot be started when the side stand is down. The engine will be stopped if the side stand is kicked down while the engine is running. - Page 10 It displays the condition if the EFi system is working correctly. If there is any problem on the EFi system, the warning indicator remains on all the time. Please contact your SYM authorized dealer if this indicator goes on. Ⓕ High Beam Indicator Light ...
- Page 11 Idling start & stop mechanism can be recovered when main switch is turned off and turned on. Vehicle speed is very important for Idling Start & Stop mechanism. For driving safety, if the speed is abnormal, please Contact your SYM authorized dealer for repair. Display Shift When the main switch is turned on, under “TOTAL”...
- Page 12 • Check/replace engine oil at the first 300 km; and check every 1,000 afterwards • If the oil check indicator does not light on when the scooter reaches oil replacement mileage, have your scooter checked by an authorized SYM dealer.
-
Page 13: Main Switch Operation
Main Switch Operation ⓐ Ⓐ Ⓒ Ⓑ Ⓔ Ⓓ Ⓖ Ⓗ Ignition Key Ⓕ Ⓐ Ignition Key Slot The ignition key into the ignition key hole to operate the ignition switch. Ⓑ “On” Position Engine can be started in this position. Ignition key cannot be removed. Ⓒ... -
Page 14: Handlebar Switches
Handlebar Switches Ⓐ Ⓑ Ⓓ Ⓕ Ⓖ Ⓒ Ⓔ Ⓔ Hazard Switch Ⓐ Passing Light Button/ Dimmer Switch Ⓕ Idling Start & Stop Switch Ⓑ Engine Stop Switch Ⓖ Starter Button Ⓒ Turn Signal Switch Ⓓ Horn Button Daytime Running Lights System Turn the main switch to “ON”... -
Page 15: Usb Charge Unit
Ⓔ Hazard Switch Turn on the hazard switch, all the turn signal lights and turn signal indicators will blink. At this time, turning main switch to OFF position cannot cancel the hazard function, and it will keep consuming battery power. Please do not use for a long period, or the engine probably cannot be started. -
Page 16: Helmet Hook
CAUTION • Gasoline is extremely flammable and can be explosive under certain conditions. Do not smoke and turn the ignition switch off when fueling. Make sure the area is well ventilated and free of any flammable source. • Never fill the fuel tank to the top. If the tank is filled to the top, heat may cause the fuel to overflow. -
Page 17: How To Start The Engine
7. How to Start the Engine CAUTION • Check engine oil and fuel before starting the engine. • To avoid sudden dash, start the engine while rear brake is applied • Check if the Idling Start & Stop switch is turned on and the indicator is on for Idling Start & Stop standby. - Page 18 CAUTION • Do not turn your main switch with ignition key during riding. • After running, the exhaust pipe is very hot, park the scooter away from pedestrian and children. Keep combustibles away from exhaust pipe. • On the occasion of long term not using the scooter, it is suggested to start the engine for around 10 minutes every week to maintain the best engine starting condition.
-
Page 19: Specification
※ In case the scooter’s specifications and construction are modified and different from the photos and diagrams on the owner’s manual / catalogues, the specifications and construction of the actual scooter shall prevail. Model MMBCU (TDA6T1-EU) Length/Width/Height (mm) 1,990 / 740 / 1,120 Curb weight / Maximium load... -
Page 20: Maintenance And Adjustment
Battery voltage lower than 11.5V? (20°C) Caution • If there is abnormal in routine check, please contact your SYM authorized dealer for repair. Engine Oil Check and Change • Park the scooter at level ground with main stand. Turn off the engine and wait for 2~3 minutes. -
Page 21: Fuel Inspection
Check if there is any interference between brake hoses and others parts. • Have your scooter checked by an authorized SYM dealer, if any damage or leakage is noticed. Brake Pad Inspection: • Check the brake pad wear of front and rear disk brake from the rear side of caliper. - Page 22 • Check the brake fluid level from inspection window, while the handle bar is set to front, and the scooter is parked at level ground with main stand. • The brake fluid level must be above the “MIN” mark on the inspection window. Recommended brake fluid: “SYMOIL”...
-
Page 23: Throttle Free Play Inspection
Battery Inspection • This motorcycle is equipped with a sealed type battery. No need to add distilled water. Have your battery checked by an authorized SYM dealer, if necessary. • Clean if the electrode is dirty or rusty. Procedures as following: Turn off the main switch. -
Page 24: Tire Inspection
Check if the steering axle locknut is tightened properly. • Turn the handlebar at all directions to check if the handlebar operates smoothly. • Check if the handlebar is pulled by the brake hose. • Have your scooter checked by an authorized SYM dealer for your safety. -
Page 25: Fuse Inspection
For replacement, please use fuses with same spec. It is strictly prohibited to use fuses out of spec or wire for replacement. • Have your scooter checked by an authorized SYM dealer, if the fuse fails repeatedly. Blown Headlight and Tail Light Inspection •... -
Page 26: General Lubrication
Spark Plug Inspection • Have the spark plug checked by an authorized SYM dealer. If the electrodes are contaminated with heavy deposits or the insulator is damaged, replace with a new one. Measure the spark plug gap Ⓐ with a wire type feeler gauge. The gap should be within 0.8 ~ 0.9 mm. -
Page 27: Air Cleaner Inspection
50% of antifreeze. • It is highly recommended to use “SYM Long Life Coolant” or equivalent products when filling or changing coolant. • Pay extra attention to radiator maintenance in extremely cold weather and temperature. Air Cleaner Inspection A dirty air cleaner element can reduce the engine performance and increase fuel consumption. -
Page 28: Taking Care Of Your Scooter
Clean the windscreen with a solution of mild detergent and cold water. Rinse well after cleaning and then dry with a clean soft cloth. If the transparency of the windscreen is reduced by scratches or contamination that cannot be removed, have the windscreen replaced by an authorized SYM dealer. -
Page 29: Storage
WARNING: • Never try to clean the windscreen while the scooter is in motion to prevent accidents from happening. • Operation of the motorcycle with a damaged or scratched windscreen will reduce riders’ forward view. Any such reduction in forward view is dangerous and can cause severe accidents. -
Page 30: Troubleshooting
Starter button EFi warning indicator 6. If the EFi warning indicator is on? Contact 7. The ignition switch is turned on, but the your SYM authorized dealer for inspection. engine cannot be started? Contact your SYM authorized dealer for inspection. -
Page 31: Periodic Maintenance Schedule
☆ The above maintenance schedule has to be done if either mileage or duration had reached its designated maintenance criteria . If any problem or question raised about your scooter, please contact your SYM authorized dealer regardless the service schedule.