Sym MB10A7-A series Service Manual page 80

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Install the shift drum plate and shift drum pin
onto the gear shift drum.
Install the gear shift spindle and gear shift
arm.
Caution
The gear shift spindle location finger must
pass through movement limit hole of the
gear shift arm.
The claw of gear shift arm must hook up
with shift drum pins.
Install the shift drum pin guide and shift drum
cam (1 bolt).
Install the shift drum stopper and stopper
spring (1 bolt).
Torque value：0.8~1.2kgf-m
Caution
After the shift drum stopper is reinstalled,
make sure it operates well.
Install the primary driven gear and put on the
cir clip.
Install the primary drive gear, clutch assembly,
and linkage mechanism.
Install the crankcase location pin, new
crankcase gasket and right crankcase cover.
Install the kick starter, gear shift pedal, footrest
and exhaust pipe.
Fill in the specified engine oil.
To this chapter contents
4. Lubrication / Clutch / Transmission
Shift drum plate
Claw of gear shift arm
Movement limit hole
Shift drum cam
Shift drum stopper
Gear shift spindle location finger
4-15