Rear Brake Pedal - Sym MB10A7-A series Service Manual

11. Rear Wheel / Rear Suspension / Rear Brake
Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com
Installation
Install in the reverse order of removal.
Torque value：
Rear fork pivot locknut
3.0~4.0kgf-m
Rear brake torque link locknut
1.5~2.5kgf-m

Rear Brake Pedal

Removal
Remove the rear fork pivot locknut.
Remove the step bar and exhaust pipe.
Remove the rear brake adjuster nut and rear
brake rod.
Remove the rear stop switch spring.
Remove the rear brake pedal spring.
Hold the vehicle with a hanger.
Remove the split pin of the rear brake pivot
bolt.
Pull out the rear brake pivot bolt.
Remove the rear brake pedal and main stand.
Installation
Install in the reverse order of removal.
Adjust the rear brake pedal free play after
installation.
Rear brake pedal free play：20~30mm
11-16
To this chapter contents
Split pin
Rear brake pivot bolt
Rear brake pivot bolt
Brake pedal spring
Brake pedal spring
Rear brake pivot bolt
Rear fork
pivot bolt
Split pin