Front Brake Hub; Front Brake Shoes - Sym MB10A7-A series Service Manual

Simpo PDF Merge and Split Unregistered Version - http://www.simpopdf.com

Front Brake Hub

Removal
Remove the front wheel.
Clean the wheel hub with vacuum cleaner.
Caution
Inhaling asbestos may cause disorders of
respiration system or cancer, therefore,
never use compressed air or dry brush to
clean brake parts. Use vacuum cleaner or
other authorized tool instead.
Grease on the brake lining will decrease
the braking efficiency.
Inspection
Check if the wheel hub is damaged or worn
out.
Replace the wheel hub if necessary.
Measure the inner diameter of the wheel hub.
Service limit： 111.0mm
Caution
Rub the wheel hub with #120 sandpaper
if it is rusty.
Measure the inner diameter of the wheel
hub by a vernier caliper.

Front Brake Shoes

Inspection
Measure the brake lining thickness on three
points (2 ends and the middle).
If the brake lining thickness is below service
limit or contaminated by grease, replace it with
new one.
Service limit： 2.0 mm
To this chapter contents
10. Steering / Front Wheel /Front Suspension / Front Brake
Front wheel hub
10-19