Using The Advanced Gateway Settings Dmz Host Option; Using Dmz Host Best Practices - Ubee DVW3201B Subscriber User Manual

Using the Advanced Gateway Settings DMZ Host Option

Steps
To set up a pass through table:
1. Click the Gateway link from the top of the screen.
2. Click Pass Through from the left side of the screen. The Pass Through fields are
explained following this screen example.
Index
MAC Address
Clear
Apply
5.13

Using the Advanced Gateway Settings DMZ Host Option

The DMZ Host option allows you to configure a host IP address to be exposed (visible) to
the WAN (public Internet). This may be used when applications do not work with port
triggers or other networking strategies.
5.13.1

Using DMZ Host Best Practices

The following instructions are best practices when adding a device into a DMZ.
1. Connect a PC to an Ethernet port on the DVW3201B. Make sure both devices are
powered on and functioning.
2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet
port on the DVW3201B.
3. Log in to the DVW3201B Web user interface.
54
Label
Defines the index number of the pass through rule.
Defines the input host's MAC address.
Deletes this rule when checked and the Apply button is
clicked.
Saves all screen changes when clicked.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Description
Ubee Interactive