Ubee Interactive
Enable SNTP
Current Time
System Start Time
Time Server 1
Time Server 2
Time Server 3
Time Zone Offset
Apply
Reset Values
5.6
Using the Advanced Gateway Setup Options
The Options selection allows you to define what networking protocols are enabled or
disabled on the device. The network address translation application-level gateway (NAT
ALG) settings provide additional security beyond the firewall.
Steps
To enable or disable network protocols:
1. Click the Gateway link from the top of the screen.
2. Click Options from the left side of the screen. The Options fields are explained
following this screen example.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Label
Enables (Yes) or disables (No) the SNTP feature.
Displays the current system time.
Displays the accumulated time since the system was started.
Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the IP address or Domain name of the time server.
Use the one provided or enter an alternative choice.
Defines the time zone offset in hours and minutes from
Greenwich MEan Time. For example: 8 hours means GMT
+8, -1 hour means GMT -1.
Saves all screen changes when clicked.
Resets the screen to factory defaults when clicked.
Using the Advanced Gateway Setup Options
Description
41