Using The Web User Interface; Accessing The Web Interface - Ubee DVW3201B Subscriber User Manual

3

Using the Web User Interface

The Web user interface (UI) for the DVW3201B is easy to use and allows you to view and
configure several settings for your wireless gateway device. You can also validate the
installation by accessing the Web user interface on the device.
Topics
See the following topics:
Accessing the Web Interface on page 17

 Logging Out of the Web Interface on page 18
 Understanding Operation Modes and the Web User Interface on page 19
3.1

Accessing the Web Interface

Access the Web user interface for the DVW3201B from a Web browser, such as Internet
Explorer on a Windows computer.
Default values are shown in the steps below. Some regions may change default values
using the cable modem or XML configuration file. Check with your provisioning team to
determine the default values for your region.
Steps
To access the Web user interface:
1. Launch an Internet browser, such as Internet Explorer, from your computer.
2. Enter the following IP address in the address bar of the browser window and press
<Enter>.
http://192.168.100.1
The Cable Modem Information screen displays general modem information about the
device.
3. Click Login to access the Web interface.
4. At the login window, enter the user credentials:
 Standard subscriber Web interface login (enter in lower case letters):
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Username: user
Password: user
17