Viewing Ipv6 Addresses In The Gateway Setup Option; Using The Lan Ipv6 Option - Ubee DVW3201B Subscriber User Manual

Using the Setup Option
5.2.1

Viewing IPv6 Addresses in the Gateway Setup Option

Additional IP addresses are needed to support the increase in Internet activity. Internet
Protocol version 6 (IPv6) addressing is supported by the DVW3201B and displayed when
the CMTS uses IPv6. The screen shot below displays an IPv6 address configuration in
the Gateway Basic Setup option.
5.2.2

Using the LAN IPv6 Option

When the CMTS supports IPv6 address configuration, the LAN IPv6 option is available.
The LAN IPv6 screen displays the assigned IP addresses which uses the Stateless Auto
Configuration feature. Stateless Auto Configuration allows devices attached to an IPv6
network to connect to the Internet without requiring DHCP support.
Steps
To view assigned IPv6 addresses:
1. Click the Gateway link from the top of the screen.
2. Click LAN IPv6 from the left side of the screen. The LAN IPv6 fields are explained
following this screen example.
36 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Ubee Interactive