Connecting Devices To The Network; Connecting An Ethernet Device - Ubee DVW3201B Subscriber User Manual

Dvw3201b advanced wireless voice gateway
Hide thumbs Also See for DVW3201B:
Table of Contents

Advertisement

Connecting Devices to the Network

3. Power on your PC. The PC must have an Ethernet network adaptor or Ethernet port
and an Internet browser installed, such as Netscape or Internet Explorer. The following
browsers are supported:
 For Windows 2000, XP, Vista, Windows 7, Firefox 1.07 and higher, Internet
Explorer v7 and above, Netscape.
 For MAC OS X, 10.2, and higher: Firefox 1.07 and higher, Safari 1.x and higher.
4. Connect the power cord included in the product package to the back of the cable
modem and then to the power outlet.
5. Insert the SMPCM9 battery into the battery housing on the bottom of the DVW3201B.
Make sure the battery is inserted past the two clips on each side that hold the battery
in place. The battery "clicks" into place when inserted properly. Use model SMPCM9
battery labeled:
6. Connect the network cable included in the product package to your computer's
Ethernet port. Connect the other end to the ETH1, ETH2, ETH3, or ETH4 port to the
cable modem.
7. Connect a coaxial cable from the CABLE port on the device to the cable wall outlet, or
to a cable splitter connected to the wall outlet.
8. Connect an analog telephone if you will be using the device for telephone service to
the TEL1 or TEL2 jack on the back panel of device. Use the supplied RJ11 telephone
cable.
9. Validate the network connection using the device LEDs to confirm operations:
 The WiFi LED must be solidly lit.
 The PWR, DS, US, and ONLINE LEDs are solidly lit.
Refer to
2.2
Connecting Devices to the Network
Use the instructions below to connect network devices and validate device functionality.
2.2.1

Connecting an Ethernet Device

You can connect up to three additional Ethernet devices to the DVW3201B.
Steps
To connect another Ethernet device to the network:
1. Connect the Ethernet cable from the Ethernet device (for example, a PC or gaming
console) to an open Ethernet port on the back of the DVW3201B.
2. Use the device LEDs to confirm operations. Refer to
page 8
3. Open a Web browser and go to any Web site to validate network/Internet connectivity
(for example, http://www.wikipedia.org).
12
ONLY USE WITH DVW3201B.
Understanding LED Operations on page 8
for more information.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
for more information.
Understanding LED Operations on
Ubee Interactive

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents