Advanced Gateway Setup - Options - Ubee ddw3611 User Manual

Ubee Interactive
3.7

Advanced Gateway Setup - Options

The Options selection allows you to define what networking protocols are enabled or
disabled on the device.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Options from the left side of the screen. The Options fields are explained
following this screen example.
Label
DDW3611 Subscriber User Guide • May, 2010
WAN Blocking
Ipsec PassThrough
PPTP PassThrough
Multicast Enable
page 7, if needed.
Description
Select Enable to block connection requests initialized from
Internet users.
If Internet users initialize an IPSec VPN request to a host
located behind the router, NAT makes this attempt fail.
Select Enable to force the router to redirect the IPSec
request to the local host.
If Internet users initialize a PPTP VPN request to a host
located behind the router, NAT will make this attempt fail.
Select Enable to force the router to redirect the PPTP
request to the local host.
Multicast optimizes the bandwidth utilization compared
with unicast especially video streaming applications.
Select Enable to enable multicast.
3.7 Advanced Gateway Setup - Options
23