Using The Setup Option - Ubee UBC1303 User Manual

Ubee Interactive
2. Click WAN on the left side menu.
3. The following sub-menus are available for selection:
 Using the Setup Option on page 39
 Using the Operation Mode Option on page 40
6.1.1

Using the Setup Option

The WAN Setup screen allows you to view information about the WAN interface.
To view WAN setup information:
1. Click WAN from the left side menu.
2. Click Setup under WAN.
Field descriptions are listed below the screen example.
Label
WAN
IPv6 Address
IPv4 Address
MAC Address
Duration
Expires
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Displays the current WAN public IPv6 address obtained from the service provider.
Displays the current WAN public IPv4 address obtained from the service provider.
Displays the WAN interface's hardware address.
Displays the accumulated time since successfully acquiring a WAN public IP address.
Displays the remaining time before the WAN IP address expires, if applicable.
Description
Using the WAN Options
39