Automatic Technology GDO-9v2 SecuraLift Installation Instructions Manual page 29

Parameters
Button Functions
Buttons
OPERATE
DOOR CODE
LIGHT CODE
DOOR CODE & CLOSE
LIGHT CODE & CLOSE
FORCE MARGIN SET & OPEN
FORCE MARGIN SET & CLOSE
FORCE MARGIN SET (then) SET
AUTO CLOSE TIME (then) OPEN
AUTO CLOSE TIME (then) CLOSE
AUTO CLOSE TIME (then) SET
FORCE MARGIN SET & AUTO CLOSE TIME (then) OPEN
FORCE MARGIN SET & AUTO CLOSE TIME (then)
CLOSE
FORCE MARGIN SET & AUTO CLOSE TIME (then) SET
CLOSE (for 6 secs.)
SET & CLOSE (for 2 secs.)
SET (then power on) & hold until all LEDs are off
DOOR CODE (then power on) & hold until all LEDs
are off
SET & DOOR CODE (the power on) and hold until all
LEDs are off
SET
Function
Opens/Stops/Closes the door
Codes a transmitter button for operate function
Codes a transmitter button for light function
Codes a transmitter button for pet mode
Codes a transmitter button for vacation function
Increases the obstruction force margin setting
Decreases the obstruction force margin setting
Resets the factory default force margin settings
Increases the auto close delay time
Decreases the auto close delay time
Resets the factory default auto close delay time
Each press of the PLUS (+) button increases the
light time by 10 secs.
Each press of the MINUS (-) button decreases the
light time by 10 secs.
Reloads the factory default light time
Clears the door limits set positions. Limits then
need to be reset
Enters pet (pedestrian) position mode
Deletes control parameters excluding transmitter
storage memory
Deletes all transmitter storage memory
Deletes all control parameters and transmitter
storage memory.
Re-initialises the Opener to re-calculate force
margin
GDO-9v2 SecuraLift ®
Owner Installation Instructions 29