Maintenance Information; Particular Risks - HAKO Scrubmaster B45 Instruction Manual

cribed aSafety information
1.4

Maintenance information

• Operating personnel must complete
the necessary daily and weekly
maintenance work. All other mainte-
nance work must be completed at
your nearest Hako service center.
• The maintenance work and mainte-
nance intervals prescribed in the op-
erating manual must be adhered to.
• Suitable tools must be used for
cleaning and maintenance work.
• The machine must be inspected by a
recognized technical expert in re-
spect of operational safety, within
the terms of the applicable accident
prevention laws, at reasonable inter-
vals (we recommend at least once a
year) and following modification or
repairs.
• Spare parts must comply with the
minimum technical requirements
stipulated by the manufacturer! This
is ensured by the use of original
spare parts.
• Before cleaning and servicing the
machine or replacing parts, switch
off the motors and main switch
(Scrubmaster B 45 CL only).
• To prevent unauthorized use of the
machine, remove the key from the
main switch (Scrubmaster B 45 CL
only).
• Always disconnect the battery termi-
nal before starting any work on the
electrical installation.
• When working in the area of the
raised recovery tank, it must be
hinged open fully to prevent it being
knocked shut or further open and
down unintentionally.
• It is not permitted to clean the ma-
chine with a pressure washer or
steam blaster.
• It is not permitted to use aggressive
and corrosive cleaning agents.
• Allow the machine to dry after being
cleaned, e.g. over the weekend.
• Only start the machine up when all
the safety equipment has been in-
stalled and brought to its protecting
position.
1.5

Particular risks

Electronics
• In the case of defects in the electrical
installation, switch the vehicle off im-
mediately and clear the fault.
• Work on the electrical equipment
may only be carried out by electri-
cians who have received the neces-
sary training and in accordance with
the electrical engineering regula-
tions.
• The vehicle's electrical equipment
must be inspected/checked at regu-
lar intervals. Defects, such as loose
connections and cable damage,
must be rectified immediately.
• Only use original fuses with the
presmperage.
Information on the power plug
• Only take hold of the power plug and
power cable when your hands are
dry.
• Never insert the power plug in the
socket if the base is wet or damp.
• Never immerse the power cable or
power plug in water or other fluids
clean them in running water. Risk of
electric shock!
• Dry any power plugs and power ca-
9