Cleaning The Brush Head; Changing The Brushes; Cleaning The Waste Container - HAKO Scrubmaster B45 Instruction Manual

Maintenance and Service

5.10.1 Cleaning the brush head

Check the brush head daily and clean it
as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
head lift.
3. Loosen the slotted-head screw (Fig.
20/1) with a coin and pivot the cover
(Fig. 20/2) upwards.
4. Remove the brushes (Fig. 20/6) from
the brush head and clean them.
When installing the brushes,
pay attention that they latch se-
curely and properly in the
catches (Fig. 20/5) provided.

5.10.2 Changing the brushes

Check the brush head weekly and
change it as necessary.
1. Switch off the machine with the main
switch.
2. Lift out the brush head with the brush
head lift.
3. Loosen the slotted-head screw (Fig.
20/1) with a coin and pivot the cover
(Fig. 20/2) upwards.
4. Remove the brushes (Fig. 20/6) from
the brush head.
5. Install the new brushes and secure
the cover again with the slotted-head
screw. Only use original spare parts!
When installing the brushes,
pay attention that they latch se-
curely and properly in the
catches (Fig. 20/5) provided.

5.10.3 Cleaning the waste container

Check the waste container daily and
clean it as necessary.
1. Lower the brush head. Switch off the
machine with the main switch.
2. Pivot the waste container (Fig. 20/3)
down a little and pull it out of the
brush head.
3. Clean the waste container and then
reinstall it.
57