Useful Tips - HAKO Scrubmaster B45 Instruction Manual

First Operation

2.5.1 Useful tips

Before beginning wet cleaning, sweep
the floor. This not only improves the
cleaning effect but also reduces the ma-
chine's liability to wear.
The floor should be treated twice in the
case of particularly dirty floors or to re-
move wax (thorough cleaning). During
the first cleaning process, the floor is
scrubbed with a cleaning agent dosage
appropriate to the degree of soiling,
whereby the squeegee is raised.
The cleaning agent is left to act on the
floor for approx. 5 to 10 minutes accord-
ing to the manufacturer's instructions,
then scrub the floor again and, after
that, treat it with the squeegee lowered.
Important information: pay attention to
the correct dosage of the cleaning
agent. The correct dosage helps to re-
duce costs and protect the environ-
ment. The development of excessive
foam impairs the machine's function. It
indicates there is too much cleaning
agent or the wrong one has been se-
lected for the cleaning process being
completed. Unused component parts of
a cleaning agent which end up in the
waste water lead to the development of
foam. Information on dosage is provid-
16
ed on the cleaning agent container. Use
the manufacturer's information as an
initial basis. Practical experience will
ensure that you quickly find out which is
the right Hako cleaning agent and the
optimum dosage to suit your needs.