Applying An Ip Policy; Figure 40-4 Menu 3.2 Tcp/Ip And Dhcp Ethernet Setup; Ethernet Ip Policies - ZyXEL Communications Prestige 662HW Series User Manual
802.11g wireless adsl 2+ 4 port security gateway
Hide thumbs
Also See for Prestige 662HW Series:
- Compact manual (39 pages) ,
- Specifications (2 pages) ,
- User manual (563 pages)
Table of Contents
Advertisement
FIELD
Action
Specifies whether action should be taken on criteria Matched or Not Matched.
Gateway addr
Defines the outgoing gateway address. The gateway must be on the same subnet as the
Prestige if it is on the LAN, otherwise, the gateway must be the IP address of a remote
node. The default gateway is specified as 0.0.0.0.
Type of Service
Set the new TOS value of the outgoing packet. Prioritize incoming network traffic by
choosing No Change, Normal, Min Delay, Max Thruput, Max Reliable or Min Cost.
Precedence
Set the new outgoing packet precedence value. Values are 0 to 7 or No Change.
Log
Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the system log
when a policy is executed.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel"
to save your configuration or press [ESC] to cancel and go back to the previous screen.
40.5 Applying an IP Policy
This section shows you where to apply the IP policies after you design them.
40.5.1 Ethernet IP Policies
From Menu 3 — Ethernet Setup, type 2 to go to Menu 3.2 — TCP/IP and DHCP Ethernet Setup.
You can choose up to four IP policy sets (from 12) by typing their numbers separated by commas, for
example, 2, 4, 7, 9.
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Figure 40-4 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as appropriate.
You can cascade up to four policy sets by typing their numbers separated by commas.
IP Policy Routing
Table 40-2 Menu 25.1.1 IP Routing Policy
Prestige 662HW Series User's Guide
DESCRIPTION
40-5
Advertisement
Table of Contents
