Ipsec Setup - ZyXEL Communications Prestige 662HW Series User Manual

Prestige 662HW Series User's Guide
FIELD
Secure GW This is the WAN IP address or the domain name (up to the first 15 characters
Addr are displayed) of the IPSec router with which you are making the VPN
connection. This field displays 0.0.0.0 when you configure the Secure
Gateway Address field in SMT 27.1.1 to 0.0.0.0.
Select Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next
Command Page or Previous Page and then press [ENTER]. You must select a rule in
the next field when you choose the Edit, Delete or Go To commands.
Select None and then press [ENTER] to go to the "Press ENTER to
Confirm..." prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or
delete a rule, first make sure you are on the correct page. When a VPN rule is
deleted, subsequent rules do not move up in the page list.
Use Go To Rule to view the page where your desired rule is listed.
Select Next Page or Previous Page to view the next or previous page of
rules (respectively).
Select Rule Type the VPN rule index number you wish to edit or delete and then press
[ENTER].
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.

42.3 IPSec Setup

Select Edit in the Select Command field; type the index number of a rule in the Select Rule field and
press [ENTER] to edit the VPN using the menu shown next.
You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully
configure and use a VPN.
42-4
Table 42-1 Menu 27.1 IPSec Summary
DESCRIPTION EXAMPLE
193.81.13.2
None
3
VPN/IPSec Setup