Wizard Setup Configuration: Connection Tests; Table 3-6 Wizard: Lan Configuration - ZyXEL Communications Prestige 662HW Series User Manual

LABEL
LAN IP Address
LAN Subnet Mask
DHCP
DHCP Server
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS Server
Back
Finish

3.13 Wizard Setup Configuration: Connection Tests

The Prestige automatically tests the connection to the computer(s) connected to the LAN ports. To test
the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main
Menu to go back to the Site Map screen.
Wizard Setup

Table 3-6 Wizard: LAN Configuration

Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
If you changed the Prestige's LAN IP
address, you must use the new IP address if
you want to access the web configurator
again.
Enter a subnet mask in dotted decimal notation.
From the DHCP Server drop-down list box, select On to allow your Prestige to assign
IP addresses, an IP default gateway and DNS servers to computer systems that
support the DHCP client. Select Off to disable DHCP server.
When DHCP server is used, set the following items:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
As above.
Click Back to go back to the previous screen.
Click Finish to save the settings and proceed to the next wizard screen.
Prestige 662HW Series User's Guide
DESCRIPTION
3-11